Unconfigures the reachable time value in router discovery advertisements on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches..
vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
This command sets the reachable-time parameter to the default value of 30,000 milliseconds.
The following example unconfigures the reachable time for the VLAN top_floor:
unconfigure vlan top_floor router-discovery reachable-time
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 32.1 Feature License Requirements document.