Creates an This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. peer switch association structure.
peer_name |
Specifies an alpha numeric string identifying the MLAG peer. |
authentication |
Authentication for MLAG checkpoint connection. |
md5 |
MD5 authentication type. |
key |
Authentication key for checkpoint connection to the MLAG peer. |
encrypted |
Authentication key in in encrypted format. |
auth_key | Authetication key used for checkpoint connection. |
N/A.
This command creates an MLAG peer switch association structure.
You must use a unique name for the peer switch. If you attempt to create an MLAG peer with a name that already exists, the following error message is displayed:
ERROR: MLAG peer with specified name already existsThe following command creates a peer switch structure switch101:
# create mlag peer switch101
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.