Clears MVRP statistics.
mvrp | Multiple This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. Registration Protocol. |
event | MVRP event counters. |
packet | MVRP packet counters. |
Clears both event and packet counters if none of the options are specified.
Use this command to clear MVRP statistics. The default behavior clears both event and packet counters if none of the options are specified. The statistics that are reset are the number of failed registrations on that port, number of MVRPDUs sent, number of MVRPDUs received with error and without error for packet counters and different MVRP events rx/tx counters for event counters. If no port is specified, MVRP statistics of all ports are reset.
The following command clears event counters:
# clear mvrp event counters
This command was first available in ExtremeXOS 15.3.
This command is available on ExtremeSwitching X460-G2 switches if the AVB feature pack license is installed on the switch.