configure fabric attach ports

configure fabric attach ports [port_list | all] enable | disable]

Description

Configures the Fabric Attach state per port.

Syntax Description

ports Specifies the port to configure.
port_list Specifies a list of ports to configure.
all Specifies configuring all ports in the system.
enable Specifies enabling Fabric Attach settings (default).
disable Specifies disabling Fabric Attach settings.

Default

All ports are configured to transmit and receive Fabric Attach attributed by default.

Usage Guidelines

Use this command to enable or disable a port from adding the Fabric Attach TLVs to the LLDP packet.

Example

The following example disables Fabric Attach port 25:

# configure fabric attach port 25 disable

History

This command was first available in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.