configure policy slices shared

configure policy slices shared [{ shared } { l7GuaranteedPercentage l7GuaranteedPercentage } { dynAclGuaranteedPercentage dynAclGuaranteedPercentage}]

Description

Configures the number of slices used by shared features, such as Layer 7 policy and dynamic ACL.

Syntax Description

slices Configures look-up stage TCAM resources.
shared Designates setting the shared lookup stage TCAM resources.
shared Sets the shared slice value (range is 0–4).
l7GuaranteedPercentage Designates setting the percentage of shared slice that Layer 7 is guaranteed.
Note: The ExtremeSwitching X435 platform does not support Layer 7 policy (DNS).
l7GuaranteedPercentage Specifies the guaranteed Layer 7 percentage value (range is 0–100).
dynAclGuaranteedPercentage Designates setting the percentage of shared slice that is dynamic ACL guaranteed.
dynAclGuaranteedPercentage Specifies the guaranteed dynamic ACL percentage value (range is 0–100).

Default

N/A.

Usage Guidelines

To make changes using this command, you must first disable policy (disable policy).

To view selections made by this command, use the show policy slices command.

Example

The following example configures policy to use 2 slices for shared features and allocate a guaranteed 40% to Layer 7 and 40% to dynamic ACLs:

# configure policy slices shared 2 l7GuaranteedPercentage 40 dynAclGuaranteedPercentage 40

History

This command was first available in ExtremeXOS 30.5.

Platform Availability

This command is available on the ExtremeSwitching X450-G2, X460-G2, X440-G2, X465, X590, X620-x, X695 series switches.