Configures synchronous Ethernet clock-source to be a source 1 or source 2 for synchronizing clock.
source-1 | Source 1 external input clock. |
source-2 | Source 2 external input clock. |
value | Value of the Quality level of the clock (T1 default QL_ST3, E1 default QL_SEC). |
None of the ports are source 1 or 2.
Use the following command to configure "source-1" as the Synchronous Ethernet clock-source. It generates ESMC messages with quality level QL_PRC.
configure network-clock sync-e clock-source source-1 quality-level QL_PRCIf no quality-level is specified, the default value is used (T1 default QL_ST3, E1 default QL_SEC).
# configure network-clock sync-e clock-source source-1 quality-level QL_PRC
This command was first available in ExtremeXOS 15.1.
This command is available on the ExtremeSwitching X460-G2 platform.