show database

show database database_name

Description

Shows information about all servers configured for Automation Edge remote VXLAN network identifier (VNI)-device databases.

Syntax Description

database Shows database information.
database_name Shows database information for the specific named database.

Default

N/A.

Usage Guidelines

N/A.

Example

The following example shows server information for all databases:

# show database
Retries : 3
--------------------------------------------------------------
Database Name
    Server                                   Port Flags
--------------------------------------------------------------
NewsroomNetwork1                            
    2001:0db8:85a3:0000:0000:8a2e:0370:7334  5456 C----
    CastleBlack                             34344 D----
    10.10.10.10                             12345 C----
NewsroomNetwork2                            
    3001:0db8:85a3:0000:0000:8a2e:0370:7334  5456 C----
    EastWatch                               34344 D----
    10.10.10.12                             12345 T----
--------------------------------------------------------------
Flags : (C) Connected, (D) Disconnected, (T) Timed out. 

The following example shows server information for the database "NewsroomNetwork1":

# show database NewsroomNetwork1
Database : NewsroomNetwork1                         Retry : 3
    Server: 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Port  : 5456  
    Status: DOWN                                         
        Last connect   : Tue Sep 10 20:22:48 UTC 2019
        Last disconnect: Tue Sep 10 20:22:48 UTC 2019
        # Disconnects  : 2
    Server: EastWatch                               Port  : 34245     
    Status: UP                                          
        Last connect   : Tue Sep 10 20:22:48 UTC 2019
        Last disconnect: Tue Sep 10 20:22:48 UTC 2019
        # Disconnects  : 5

History

This command was first available in ExtremeXOS 31.1 as a demonstration feature.

This command is fully supported in ExtremeXOS 31.2.

Platform Availability

This command is available on ExtremeSwitching X465, X590, X695 series switches.