This command enables or disables ARP suppression on VXLAN tenant VLANs.
vlan_name | VLAN name. |
suppress | Specifies suppression of ARP on VXLAN tenant VLANs. |
arp-only | Specifies ARP suppression. Requests may be proxied. |
none | Disable ARP suppression (default). |
ARP is suppressed.
This command is allowed on VXLAN tenant VLANs only.
The following example enables ARP suppression on VXLAN tenant VLAN "tenant1":
configure vlan tenant1 suppress arp-only
This command was first available in ExtremeXOS 22.3.
This command is supported on the ExtremeSwitching X465, X590, X695 series switches, and stacks with X465, X590, X695 slots only.