This command creates a remote endpoint.
| ipaddress | A remote endpoint IP address. |
| vr | VR/VRF instance the remote endpoint is associated with |
| vr_name | An existing VR/VRF name. |
VR-Default
This command is useful when you want to explicitly add a remote endpoint in addition to the ones learnt dynamically (OSPF extensions). In flood mode explicit, you must create a remote-endpoint using this command, if the configurations on remote-endpoint (like monitor) need to be saved to the configuration. Otherwise, the configuration will be lost after the switch reboots.
To create a remote endpoint:
create virtual-network vxlan remote-endpoint ipaddress 1.2.3.4
This command was first available in ExtremeXOS 21.1.
This command is supported on the ExtremeSwitching X465, X590, X695 series switches, and stacks with X465, X590, X695 slots only.