Assigns an ESRP domain ID to an ESRP domain.
| esrpDomain | Specifies the name of an ESRP domain. |
| number | Specifies the number to use for the ESRP domain ID. The user-configured ID range is 4096 through 65,535. |
If the master This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. is tagged, ESRP uses that VLANid for the ESRP domain ID. If the master VLAN is untagged, you must specify the ESRP domain ID.
Before you enable a specific ESRP domain, it must have a domain ID. A domain ID is either a user-configured number or the VLANid of the tagged master VLAN. If you do not have a domain ID, you cannot enable ESRP on that domain.
Each switch participating in ESRP for a particular domain must have the same domain ID configured.
The number parameter range for user-configured domain IDs is 4096 through 65,535.
If the master VLAN is tagged, you can use that VLANid for the ESRP domain ID. The range for VLAN tags is 2 through 4095. Tag 1 is assigned to the default VLAN.
The following command assigns the domain ID 5000 to ESRP domain esrp1:
configure esrp esrp1 domain-id 5000
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.