Displays the RADIUS client configuration and operating statistics for one or both NMS servers.
primary | secondary | Specifies whether you are displaying the primary or secondary NMS server information. |
If you do not specify primary or secondary, the default action is to display both the primary and secondary NMS server configurations.
None.
The following command displays the RADIUS client information for the primary and secondary NMS servers:
# show vm-tracking nms server VM Tracking NMS (RADIUS): enabled VM Tracking Radius server connect time out: 3 seconds Primary VM Tracking NMS server: Server name : IP address : 10.127.5.221 Server IP Port: 1812 Client address: 10.127.10.173 (VR-Mgmt) Shared secret : pmckmtpq Access Requests : 0 Access Accepts : 0 Access Rejects : 0 Access Challenges : 0 Access Retransmits: 0 Client timeouts : 0 Bad authenticators: 0 Unknown types : 0 Round Trip Time : 0 Secondary VM Tracking NMS server: Server name : IP address : 10.127.5.223 Server IP Port: 1812 Client address: 10.127.10.173 (VR-Mgmt) Shared secret : rjgueogu Access Requests : 0 Access Accepts : 0 Access Rejects : 0 Access Challenges : 0 Access Retransmits: 0 Client timeouts : 0 Bad authenticators: 0 Unknown types : 0 Round Trip Time : 0
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.