Enables the ICMP IPv6 reply to multicast or anycast echo request.
| ignore-multicasts | Specifies to ignore ICMP echo requests destined to an IP multicast address. Default is ignore (disable). |
| ignore-anycasts | Specifies to ignore ICMP echo requests destined to an IP anycast address. Default is ignore (disable). |
Ignore (disable).
Use this command to enable an ignore reply to multicast or anycast echo request.
The following example specifies to ignore ICMP multicast echo requests:
enable icmp ipv6 ignore-multicasts
This command was first available in ExtremeXOS 31.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.