configure cdp power-available ports

configure cdp power-available [advertise | no-advertise] ports [port_list | all]

Description

This command configures the advertising status of the power available TLV on CDP ports.

Syntax Description

advertise Specifies to send the TLV to neighbors.
no-advertise Specifies not to send the TLV to neighbors.
port_list Port list separated by a comma or - .

Default

No-advertise.

Usage Guidelines

This command is for This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, and X465 series switches. switches.

Example

The following example advertises the Power Available TLV on port 1:

configure cdp power-available advertise ports 1
The following example does not advertise the Power Available TLV on port 1:
configure cdp power-available no-advertise ports 1

History

This command was first available in ExtremeXOS 21.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.