Add a control This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. on the ERPS ring.
| ring-name | Alphanumeric string that identifies the ERPS ring. |
| control | VLAN that carries ERPS control traffic. |
| vlan_name | Alphanumeric string identifying the VLAN to be used for control traffic. |
N/A.
Use this command to add a control VLAN on the ERPS ring. This is the VLAN that carries ERPS control traffic.
Note
Other VLAN types such as VMAN, SVLAN, CVLAN and BVLAN will not be used for control traffic. A control VLAN cannot be deleted from a ring that has CFM configured.The following command adds a control VLAN named “vlan10” to an ERPS ring named “ring1”:
configure erps ring1 add control vlan vlan10
This command was first available in ExtremeXOS 15.1.