show network-clock ptp

show network-clock ptp

Description

Show the PTP clock recovery state information. The clock recovery using PTP event messages undergoes the following servo state changes:

Syntax Description

N/A.

Default

N/A.

Usage Guidelines

See Description.

Example

# show network-clock ptp
=====================================================================
Servo State Information
=====================================================================
Servo State             :  3 (Normal Loop)
Servo State Duration    :  10285 (sec)
=====================================================================

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the ExtremeSwitching X460-G2 platform.

Note

Note

PTP commands can be used only with the Network Timing feature pack.