Configures Spanning Tree BPDU hardware filters.
system-wide | Installs system-wide hardware filters for Spanning Tree. |
port-based | Installs per-port hardware filters for Spanning Tree. |
By default, system-wide hardware filters are installed.
You must disable Spanning Tree before changing the filter method. Use the disable stpd command to disable Spanning Tree.
The following example sets the filter method for Spanning Tree as system-wide.
configure stpd filter-method system-wide
This command was first available in ExtremeXOS 15.7.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.