Displays the load sharing key values for all ports in the port_list. These values may be either default values, or configured values.
ports |
Specifies the ports for the load sharing. |
port_list |
Specifies one or more ports or slots and ports. |
N/A.
Use this command to display the health-check LAGs that have been configured on the switch.
X460G2-24p-24hp.1 # show sharing port-based keys 1: 0 2: 1 3: 2 4: 3 5: 4 6: 5 7: 6 8: 7 9: 8 10: 9 11: 10 12: 11 13: 12 14: 13 15: 14 16: 15 17: 0 18: 1 19: 2 20: 3 21: 4 22: 5 23: 6 24: 7 25: 8 26: 9 27: 10 28: 11 29: 12 30: 13 31: 14 32: 15 33: 0 34: 1 35: 2 36: 3 37: 4 38: 5 39: 6 40: 7 41: 8 42: 9 43: 10 44: 11 45: 12 46: 13 47: 14 48: 15 49: 0 50: 1 51: 2 52: 3
This command was first available in ExtremeXOS 15.4.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.