Displays the global parameters for L2PT.
| l2pt | Displays global Layer 2 protocol tunneling parameters. |
Disabled.
Use this command to display the global parameters for L2PT.
The following is an example of the command's output:
# show l2pt Encapsulation Destination MAC Address: 01:00:00:01:01:02
This command was first available in ExtremeXOS 15.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.