Configures the reachable time value in router discovery advertisements on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches..
| vlan_name | Specifies an IPv6 configured VLAN. |
| reachabletime | Specifies the reachable time value in advertisements, in milliseconds. Range is 0 to 3,600,000 (one hour). |
30,000 milliseconds.
The reachable time is the time, in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation. A value of 0 means the time is unspecified by this router. The maximum value is 3,600,000 (1 hour).
The following example configures the reachable time to be 3,600,000 milliseconds for the VLAN "top_floor":
configure vlan top_floor router-discovery reachable-time 3600000
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 32.1 Feature License Requirements document.