enable bootp vlan

enable bootp {ipv4} | dhcp {ipv4 | ipv6} ] vlan [vlan | all]

Description

Enables the generation and processing of BOOTP packets on a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. to obtain an IP address for the VLAN from a BOOTP server.

Syntax Description

bootp Enable BOOTP client.
ipv4 IPv4 client.
dhcp Enable DHCP client.
ipv6 IPv6 client.
vlan Specifies a VLAN name.
all Specifies all VLANs.

Default

Disabled.

Usage Guidelines

If IPv4/IPv6 keyword is not specified , ipv4 would be taken as default for the mentioned VLAN.

Example

The following example enables the generation and processing of BOOTP packets on a VLAN named "accounting":

enable bootp vlan accounting

History

This command was first available in ExtremeXOS 10.1.

The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.