Configures a trusted neighbor policy to determine trusted RIP router neighbors for the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. on the switch running RIP.
vlan_name |
Specifies a VLAN name. |
all |
Specifies all VLANs. |
policy-name |
Specifies a policy. |
none |
Removes any trusted-gateway policy from the VLAN. |
N/A.
Use this command to set a policy to determine trusted neighbors. A neighbor is defined by its IPaddress. Only the RIP control packets from trusted neighbors will be processed.
The following command configures RIP to use the policy nointernet to determine from which RIP neighbor to receive (or reject) the routes to the VLAN backbone:
# configure rip vlan backbone trusted-gateway nointernet
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.1 Feature License Requirements document.
This command is available on all platforms with an Edge, Advanced Edge, or Core license.