Configures the IP address of a point-to-point neighbor.
vlan-name | Specifies a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. name. |
ip-address | Specifies an IP address. |
N/A.
None.
The following command configures the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor add 10.0.0.1
This command was first available in ExtremeXOS 10.1.
This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS 32.1 Feature License Requirements document.