Enables the MPLS interface for the specified This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches..
vlan | Enables an MPLS interface for one or more specific VLANs. |
vlan_name | Enables an MPLS interface on the specified VLAN. |
vlan all | Enables an MPLS interface for all VLANs that have been added to MPLS. |
Disabled.
The following command enables an MPLS interface for the specified VLAN:
enable mpls vlan vlan-nyc
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the ExtremeXOS 32.1 Feature License Requirements document.