show iproute origin

show iproute origin [auto-peering | bgp | blackhole | bootp | direct | ebgp | embgp | ibgp | icmp | imbgp | isis | isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external | mbgp | mpls | evpn {signaling-protocol [ldp | rsvp-te | static]} | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | rip | static ] {unicast} {vr vrname}

Description

Displays the contents of the IP routing table for routes with the specified origin.

Syntax Description


auto-peering	Specifies BGP auto-peering routes.
bgp	Specifies BGP routes.
blackhole	Specifies blackhole routes.
bootp	Specifies BOOTP routes.
direct	Specifies direct routes.
ebgp	Specifies E-BGP routes.
embgp	Specifies EMBGP routes.
ibgp	Specifies I-BGP routes.
icmp	Specifies ICMP routes.
imbgp	Specifies IMBGP routes.
isis	Specifies IS-IS routes.
isis-level-1	Specifies IS-IS Level 1 routing.
isis-level-1-external	Specifies IS-IS Level 1 External routing.
isis-level-2	Specifies IS-IS Level 2 routing.
isis-level-2-external	Specifies IS-IS Level 2 External routing.
mbgp	Specifies MBGP routes.
mpls	Specifies MPLS routes. This option is available only on platforms that support the MPLS feature pack, which is described in the ExtremeXOS 32.1 Feature License Requirements document.
evpn	Specifies EVPN routes.
signaling-protocol [ldp \| rsvp-te \| static]	Specifies an MPLS signaling protocol. This option is available only on platforms that support the MPLS feature pack, which is described in the ExtremeXOS 32.1 Feature License Requirements document.
ospf	Specifies OSPF routes.
ospf-extern1	Specifies OSPF External 1 routing.
ospf-extern2	Specifies OSPF External 2 routing.
ospf-inter	Specifies OSPFInter routing.
ospf-intra	Specifies OSPFIntra routing.
rip	Specifies RIP routes.
static	Specifies static routes.
unicast	Displays unicast routes with the specified origin.
`vrname`	Specifies a VR or VRF.

Default

N/A.

Usage Guidelines

None.

Example

The following example displays all the BGP routes:

# show iproute origin bgp

History

This command was first available in ExtremeXOS 10.1.

The ipv4 keyword was added in ExtremeXOS 11.2.

The embgp, mbgp, and mpls options were added and the ipv4 and multicast options removed in ExtremeXOS 12.2.2.

The evpn option was added in ExtremeXOS 30.7.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.