unconfigure inline-power operator-limit ports

unconfigure inline-power operator-limit ports [all |port_list]

Description

Unconfigures the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, and X465 series switches. operator limit setting and resets the power limit allowed for PDs connected to the specified ports to the default values.

Syntax Description

all Specifies all ports.
port_list Specifies one or more slots and ports.

Default

PoE—15400 mW.

PoE+—30000 mW.

Usage Guidelines

This command unconfigures any previously configured operator limit for the specified ports. It resets the maximum power that any PD can draw to 15400 mW for PoE and 30000 mW for PoE+.

Example

The following command resets the limit on ports 3 to 6 on a switch to the default value of 15400 mW:

unconfigure inline-power operator-limit ports 3-6

History

This command was first available in ExtremeXOS 11.1.

PoE+ was added in ExtremeXOS 12.5.

Platform Availability

This command is available on the PoE devices listed in Extreme Networks PoE Devices.