Unconfigures the RADIUS client configuration.
mgmt-access | Specifies the switch management RADIUS authentication server. |
netlogin | Specifies the network login RADIUS authentication server. |
primary | Unconfigures the primary RADIUS server. |
secondary | Unconfigures the secondary RADIUS server. |
Unconfigures both primary and secondary servers for management and network login.
If you do not specify any keywords, this command unconfigures both the primary and secondary servers for management and network login.
mgmt-access—Use this keyword to unconfigure only the server(s) for management functions.
netlogin—Use this keyword to unconfigure only the server(s) for network login.
primary—Use this keyword to specify only the primary RADIUS sever.
secondary—Use this keyword to specify only the secondary RADIUS server.
The following command unconfigures the secondary RADIUS server settings for both management and network login:
unconfigure radius server secondary
The following command unconfigures the secondary RADIUS server settings for only network login:
unconfigure radius netlogin server secondary
The following command unconfigures all RADIUS server settings for only management functions:
unconfigure radius mgmt-access
This command was first available in ExtremeXOS 10.1.
The mgmt-access and netlogin keywords were added in ExtremeXOS 11.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.