Configures the cost metric of one or all interface(s) or an area.
area-identifier | Specifies an OSPF area. |
vlan-name | Specifies a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. name. |
all | Specifies all VLANs. |
automatic | Determine the advertised cost from the OSPF metric table. |
cost | Specifies the cost metric. |
The default cost is automatic.
The range is 1 through 65535.
The following command configures the cost metric of the VLAN accounting:
configure ospf vlan accounting cost 10
This command was first available in ExtremeXOS 10.1.
This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS 32.1 Feature License Requirements document.