Configures the LLDP port to advertise or not advertise link-aggregation capabilities to its neighbors.
all | Specifies all ports on the switch. |
port_list | Specifies one or more ports or slots and ports. |
advertise | Specifies to send the information to neighbors. |
no-advertise | Specifies not to send the information to neighbors. |
No advertise.
When configured, this TLV is added to each LLDP port LLDPDU indicating the link-aggregation capabilities, status, and value of the master port of the load-sharing group.
The following command configures port 1:12 to not advertise link-aggregation capabilities to neighbors:
configure lldp ports 1:12 no-advertise vendor-specific dot3 link-aggregation
This command was first available in ExtremeXOS 11.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.