Clears the counters associated with Link Aggregations Control Protocol (LACP).
This command has no parameters or variables.
N/A.
LACP PDUs dropped on non_LACP ports.
Rx - Accepted.
Rx - Dropped due to error in verifying PDU.
Rx - Dropped due to LACP not being up on this port.
Rx - Dropped due to matching own MAC.
Tx - Sent Successfully.
Tx - Transmit error.
The following command clears the LACP counters on all ports:
clear lacp counters
This command was first available in ExtremeXOS 11.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.