Configures the timer value returned as part of the DHCP response for clients attached to networklogin-enabled ports.
vlan_name | Specifies the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. to which this timer value applies. |
seconds | Specifies the timer value, in seconds. |
10 seconds.
The timer value is specified in seconds.
This command applies only to the web-based authentication mode of network login.
The following command sets the timer value to 15 seconds for VLAN corp:
configure vlan corp netlogin-lease-timer 15
This command was first available in ExtremeXOS 11.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.