Disables blackholing of packets during ACL refresh.
This command has no arguments or variables.
The feature is enabled.
When access control lists (ACLs) are refreshed, this feature provides that any packets arriving during the refresh will be blackholed.
If you disable this feature, the ACLs will be refreshed as described in the refresh policy command.
To enable this feature, use the following command:
enable access-list refresh blackhole
disable access-list refresh blackhole
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.