Enables CLI command authorization.
This command has no arguments or variables.
Disabled.
When enabled, each command is transmitted to the remote TACACS+ server for authorization before the command is executed. TACACS+ authentication must also be enabled to use TACACS+ authorization. Use the following command to enable authentication:
enable tacacsThe following command enables TACACS+ command authorization for the switch:
enable tacacs-authorization
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.