Enables the generation and processing of DHCP packets on a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. to obtain an IP address for the VLAN from a DHCP server.
vlan_name | Specifies a VLAN name. |
all | Specifies all VLANs. |
If the IPv4/IPv6 keyword is not specified, IPv4 is taken as default for the mentioned VLAN | all.
None.
The following command enables the generation and processing of DHCP packets on a VLAN named accounting:
enable dhcp vlan accounting enable dhcp ipv6 vlan accounting
This command was first available in ExtremeXOS 10.1.
This command was modified in ExtremeXOS 15.6 to include the ipv4 and ipv6 keywords.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.