disable virtual-router

disable virtual-router vrf-name

Description

Disables a VRF.

Note

This command is only applicable for VRFs.


`vrf-name`	Specifies the name of the VRF.

Enabled.

When you disable a VRF, the software does the following:

Disables Layer 3 protocols.
Marks static routes as inactive and removes them from the hardware forwarding tables.
Flushes the IP ARP and IPv6 neighbor-discovery caches.

The following example disables VRF "vrf1":

disable virtual-router vrf1

This command was first available in ExtremeXOS 12.5.

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.