Defines masks for the IPv6 source and destination address flow keys.
port_list | Specifies the ports. |
source | Specifies a source IP address. |
destination | Specifies a destination IP address. |
value | Specifies the IP address mask (in standard format). |
N/A.
Use this command to define masks for the IPv6 source and destination address flow keys on a per port basis. For example, this can be used to minimize the information sent to the collector and aggregate flows.
The following command defines a mask for the source IP address flow key ff::0 on port 21:
# configure ip-fix ports 21 flow-key ipv6 mask source ipaddress ff::0
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X460-G2 series switches.