Configures the preferred cipher suite for MAC Security (MACsec).
cipher-suite | Selects provisioning MACsec cipher suite to be used if elected as key server. |
gcm-aes-128 | Galois/Counter Mode of AES-128 symmetric block cipher (Default). |
gcm-aes-256 | Galois/Counter Mode of AES-256 symmetric block. |
ports | Specifies configuring ports. |
port_list | Lists which ports to configure the selected cipher suite on. |
The cipher suite gcm-aes-128 is selected by default.
GCM-AES-128 Only | GCM-AES-256 and GCM-AES-128 |
---|---|
– | Ports with LRM/MACsec Adapter |
ExtremeSwitching X460-G2-24p-24hp, X460-G2-24t-24ht switches ports 25–28 without LRM/MACsec Adapter | – |
ExtremeSwitching X465 series switches front panel 1G ports (non-multi-rate ports) |
ExtremeSwitching X465 series switches ports on MACsec-capable VIMs without LRM/MACsec Adapter. ExtremeSwitching X465-24XE switches front panel ports without LRM/MACsec Adapter. |
If GCM-AES-256 is desired between two switches using the LRM/MACsec Adapter, you need to issue this command on at least the key server side, but preferably on both sides.
If the port is elected as MKA key server, then the configured cipher suite is used to protect all port traffic. If the peer port is elected as MKA key server, then the peer chooses which cipher suite to use.
# configure macsec cipher-suite gcm-aes-256 22,30-33
# configure macsec cipher-suite gcm-aes-128 30
This command was first available in ExtremeXOS 30.2.
This command is available on the following platforms.
Note
The MACsec feature requires the installation of the MAC Security feature pack license.Platform | Ports | LRM/MACsec Adapter Required? |
---|---|---|
ExtremeSwitching X460-G2-24p-24hp, X460-G2-24t-24ht switches | Half-duplex, 1G ports (25–48) | No |
All other SFP/SFP+ ports * | Yes | |
ExtremeSwitching X450-G2, X460-G2, X440-G2, X590, X620, and X695 series switches | SFP/SFP+ ports * | Yes |
ExtremeSwitching X465 |
X465-24W, X465-24XE: ports 1–24 X465-48T, X465-48P, X465-48W, X465i-48W: ports 1–48 X465-24MU-24W: ports 25–48 VIM5-4XE: all 4 ports VIM5-4YE in X465-24MU, X465-24MU-24W switches: all 4 ports VIM5-4YE in X465-24W, X465-48T, X465-48P, X465-48W, X464.24S, X465-24S, X465i-48W: first 2 ports only |
No |
Note: * For ExtremeSwitching X460-G2
series switches, the VIM-2X option does not support the
LRM/MACsec Adapter.
|