show l2pt profile

show l2pt profile profile_name

Description

Displays the contents of an L2PT profile.

Syntax Description

profile Displays profile that defines L2PT configuration for L2 protocols.
profile_name Displays only the specified profile.

Default

Disabled.

Usage Guidelines

Use this command to display the contents of an L2PT profile.

Example

The following is an example of the command's output:

# show l2pt profile
                                                                      DSCP
Profile Name                      Protocol Filter Name              Action  CoS    DSCP  Replace
--------------------------------  --------------------------------  ------  ---    ----  ------
my_l2pt_access_prof               my_list                           tunnel    1      63  Yes
                                  my_other_list                     tunnel    7       0  No 
my_l2pt_network_prof              mylist                            encap            20  No
                                  my_other_list                     encap             8  No
                                  my_none¬_list                     none             25  No
 
# show l2pt profile my_l2pt_access_prof
 
                                                                                         DSCP
Profile Name                      Protocol Filter Name              Action  CoS    DSCP  Replace
--------------------------------  --------------------------------  ------  ---    ----  ------
my_l2pt_access_prof               my_list                           tunnel    1      23  Yes
                                  my_other_list                     tunnel    7       0  No

History

This command was first available in ExtremeXOS 15.5.

Support for DSCP was added in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.