Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally, the 2.5 Gbps, 5 Gbps, 10 Gbps, 25 Gbps, 40 Gbps, 50 Gbps, and 100 Gbps interfaces.
cost | Specifies the interface cost for the indicated interfaces. |
The following command configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
This command was first available in ExtremeXOS 10.1.
The 40 Gbps parameter was added in ExtremeXOS 12.6.
This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS 32.1 Feature License Requirements document.