Disables the auto provision capability.
This command has no arguments or variables.
N/A.
Use this command to disable the auto provision capability.
To display the status of auto provision on the switch, use the show auto-provision command.
The following command disables the auto provision capability:
disable auto-provision
The following message is displayed:
# disable auto-provision This setting will take effect at the next reboot of this switch.
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.