Shows bridge port extender (BPE) statistics information on an individual per-cascade port basis.
| vpex | Specifies Virtual Port Extender (VPEX). |
| ports | Specifies the cascade port attached to the BPE. |
| port_list | Specifies the cascade port attached to the BPEr. |
| statistics | Specifies BPE statistics information on a per-port basis. |
| detail |
Shows detailed BPE statistics information. The detail option shows zero and non-zero counters; when detail is omitted, only non-zero counters appear. |
N/A.
This command displays information on an individual port basis (cascade ports can be LAG members). If the detail option is not used, only non-zero counts appear.
The following example shows non-detailed BPE statistics for all cascade ports:
# show vpex ports statistics
Port: 1:45 BPE: d8:84:66:88:97:fb Cascade Port: 1:45 Slot: 100 [LAG]
CSP Open: Local: 1 Remote: 1
txRequests : 9596 rxResponses : 9596
txResponses : 0 rxRequests : 0
rxrqErrors : 0 rxrspErrors : 0
Standard Statistics
-------------------
TX Requests RX Responses
orgSpecific : 9596 9596
TX Responses RX Requests
Organizationally Specific Statistics
------------------------------------
TX Requests RX Responses
envGet : 1 1
getBulk : 9594 9594
portCntrClear : 1 1
RX Requests TX Responses
No Valid Statistics
================================================================================
Port: 1:46 BPE: d8:84:66:88:97:fc Cascade Port: 1:45 Slot: 101 [LAG]
CSP Open: Local: 1 Remote: 1
txRequests : 0 rxResponses : 0
txResponses : 0 rxRequests : 0
rxrqErrors : 0 rxrspErrors : 0
Standard Statistics
-------------------
TX Requests RX Responses
TX Responses RX Requests
Organizationally Specific Statistics
------------------------------------
TX Requests RX Responses
No Valid Statistics
RX Requests TX Responses
No Valid Statistics
The following example shows detailed BPE statistics for cascade port 1:45:
# show vpex ports 1:45 statistics detail
Port: 1:45 BPE: d8:84:66:88:97:fb Cascade Port: 1:45 Slot: 100 [LAG]
CSP Open: Local: 1 Remote: 1
txRequests : 9702 rxResponses : 9702
txResponses : 0 rxRequests : 0
rxrqErrors : 0 rxrspErrors : 0
Standard Statistics
-------------------
TX Requests RX Responses
cspOpen : 0 0
extPortCreate : 0 0
extPortDelete : 0 0
portParamSet : 0 0
portParamGet : 0 0
statusParamSet : 0 0
echanRegister : 0 0
echanRegGet : 0 0
statisticsGet : 0 0
transitDelaySet : 0 0
objectGet : 0 0
objectSet : 0 0
cnParamGet : 0 0
cnParamSet : 0 0
orgSpecific : 9702 9702
unsupported : 0 0
TX Responses RX Requests
cspOpen : 0 0
extPortCreate : 0 0
extPortDelete : 0 0
portParamSet : 0 0
portParamGet : 0 0
statusParamSet : 0 0
echanRegister : 0 0
echanRegGet : 0 0
statisticsGet : 0 0
transitDelaySet : 0 0
objectGet : 0 0
objectSet : 0 0
cnParamGet : 0 0
cnParamSet : 0 0
orgSpecific : 0 0
unsupported : 0 0
Organizationally Specific Statistics
------------------------------------
TX Requests RX Responses
reload : 0 0
swapImg : 0 0
imageInfoGet : 0 0
trstdPrtInfGet : 0 0
poeParamSet : 0 0
portCfgSet : 0 0
portOpStatGet : 0 0
frmSzeLimSet : 0 0
frmSzeLimGet : 0 0
lagBalAlgSet : 0 0
ecpParamSet : 0 0
cbMsgRefl : 0 0
envGet : 1 1
closeNotif : 0 0
getBulk : 9700 9700
localMirrSet : 0 0
debugInfoGet : 0 0
qCountersGet : 0 0
qTrafShaperSet : 0 0
cpuUtilGet : 0 0
diagSet : 0 0
addtlCapSet : 0 0
defPrtQoSParSet : 0 0
dtaCtlTrfPriSet : 0 0
ipInterfaceSet : 0 0
lagSet : 0 0
portCntrClear : 1 1
poeFltReasGet : 0 0
eeeSet : 0 0
poeGlobParmSet : 0 0
tftpDownload : 0 0
sfpNotifSet : 0 0
diagInfoGet : 0 0
unsupported : 0 0
RX Requests TX Responses
POE Notif : 0 0
cbMsgRefl : 0 0
sfpNotif : 0 0
unsupported : 0 0
This command was first available in ExtremeXOS 22.5.
This command is available on ExtremeSwitching X465 and X590 series switches.