Displays the dynamic ACL counters.
countername | Display the counter. |
any | Specifies the wildcard ACL. |
port_list | Specifies which ports‘ ACLs to display. |
vlan_name | Specifies which This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.‘s ACL to display. |
ingress | Display ingress ACLs. |
egress | Display egress ACLs. |
The default is to display all interfaces, ingress.
None.
The following command displays all the dynamic ACL counters:
# sh access-list dynamic counter Vlan Name Port Direction Counter Name Packet Count Byte Count ================================================================== * 15 ingress mac1Count 594 * 15 egress egressCount 0
The following command displays output with port number specified:
# sh access-list dynamic counter ports 15 Vlan Name Port Direction Counter Name Packet Count Byte Count ================================================================== * 15 ingress mac1Count 757 * 15 egress egressCount 0
The following command displays output with counter name specified:
# sh access-list counter mac1 ports 15,20 Policy Name Vlan Name Port Direction Counter Name Packet Count Byte Count ================================================================== temp * 15 ingress mac1 0 temp * 20 egress mac1 0
This command was first available in ExtremeXOS 11.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.