Deletes a given clock port (This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.), or all clock ports added to the specified PTP clock instance.
boundary |
Boundary clock instance. |
ordinary |
Ordinary clock instance. |
vlan |
VLAN. |
vlan_name |
Name of the specific VLAN to be added to or deleted from the PTP clock instance. |
all |
Add or delete all VLANs. |
N/A.
Use this command to delete a given clock port (VLAN), or all clock ports added to the specified PTP clock instance.
The following example deletes all clock ports from the boundary clock:
# configure network-clock ptp boundary delete vlan all
The following example deletes vlan lpbk-gm from the ordinary clock:
# configure network-clock ptp ordinary delete vlan lpbk-gm
This command was first available in ExtremeXOS 15.1.
This command is available on the ExtremeSwitching X460-G2 platform.
Note
PTP commands can be used only with the Network Timing feature pack.