Configures RIP on an IP interface.
vlan_name |
Specifies a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. name. |
all |
Specifies all VLANs. |
N/A.
When an IP interface is created, RIP configuration is disabled on the interface by default. When the RIP interface is disabled, the parameters are not reset to default automatically.
The following command configures RIP on the VLAN finance:
# configure rip add finance
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.1 Feature License Requirements document.