Configures the delay before the receive state machine is reinstalled once the LLDP transmit mode has been disabled.
| seconds | Specifies the delay that applies to the reinitialization attempt. The range is 1 to 10 seconds. |
2 seconds.
N/A.
The following command configures a reinitialization delay of 10 seconds:
configure lldp reinitialize-delay 10
This command was first available in ExtremeXOS 11.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.