Unconfigures synchronous Ethernet on a particular port to be a source 1 or source 2 for synchronizing clock.
source-1 |
Source 1 external input clock |
source-2 |
Source 2 external input clock |
port |
port |
port |
100Mbps/1G port Copper/Fiber Ports |
N/A.
Use this command to unconfigure SyncE on a particular port.
The following command unconfigures SyncE as a primary master on port 2:
# unconfigure network-clock sync-e port 2
This command was first available in ExtremeXOS 15.1.
This command is available on only on the ExtremeSwitching X460-G2 series switches.