Use this command to enable PTP on the clock instance or on the specified This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. (clock port).
boundary |
Boundary clock. |
ordinary |
Ordinary clock. |
vlan |
VLAN. |
vlan_name |
VLAN name. |
N/A.
Use this command to enable PTP on the clock instance or on the specified VLAN (clock port).
The following example enables the ordinary clock:
disable network-clock ptp ordinary
The following example enables the clock port lpbk-transit on the boundary clock:
disable network-clock ptp boundary vlan lpbk-transit
This command was first available in ExtremeXOS 15.1.
This command is available on the ExtremeSwitching X460-G2 series switch.