ip igmp snooping last-member-query-interval

Sets the IGMP snooping last member query interval value in milliseconds.

Syntax

ip igmp snooping last-member-query-interval value

no ip igmp snooping last-member-query-interval value

Command Default

The default is 1000 ms.

Parameters

value: Sets the value in milliseconds. The range is 100 to 25500 milliseconds.

Modes

VLAN configuration mode

Usage Guidelines

When a leave is received, a group-specific query is sent. Last member query interval configuration controls the time interval between last member queries sent.

Examples

The following example sets the IGMP snooping last member query interval.

device(config)# vlan 1
device(config-Vlan-1)# ip igmp snooping last-member-query-interval 2000