The user can configure the record route option using the record command.
The record route option is enabled by default.
MPLS router Bypass LSP configuration mode.
When enabled, the RSVP session messages of the bypass LSP records the bypass LSP actual path.
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The following example enables the record route option for bypass LSP my-bypass-lsp.
device>configure device(config)# router mpls device(config-router-mpls)# bypass-lsp my-bypass-lsp device(config-router-mpls-bypass-lsp-my-bypass-lsp)# record enable