qos rx-queue cos-threshold

Configures the QoS ingress queue cost of service (CoS) thresholds.

Syntax

qos rx-queue cos-threshold threshold_value_0 threshold_value_1 threshold_value_2 threshold_value_3 threshold_value_4 threshold_value_5 threshold_value_6 threshold_value_7

[no] qos rx-queue cos-threshold

Command Default

The CoS threshold values for the ingress queue are not configured.

Parameters

threshold_value_n: There are eight entries for this parameter with each entry representing a percentage. Each position matches a specific inbound CoS with the first position (cos_threshold_0) representing CoS 0, the second CoS 1, and so on.

Modes

Ethernet interface configuration mode.

Usage Guidelines

The total of all the entries cannot exceed 100%.

A 0 may be entered for any of the values.

Examples

Follow this example to configure the QoS ingress queue CoS thresholds on a specific Ethernet interface.

device# configure terminal
device(config)# interface ethernet 1/5
device(conf-if-eth-1/5)# qos rx-queue cos-threshold 10 10 10 10 10 20 20 10