bypass-lsp (Telemetry)

Indicates the MPLS Bypass-LSP to be used for the mpls-traffic-bypass profile.

Syntax

bypass-lsp { bypass-lsp-name }

no bypass-lsp { bypass-lsp-name }

Telemetry profile configuration mode

The bypass-lsp-name variable must be unique among all regular LSPs and bypass LSPs.

The no form of the command deletes the bypass LSP from the profile.

MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".

The following example selects the xm2by LSP as the bypass LSP for the profile.

 
device(config)# telemetry profile mpls-traffic-bypass default_mpls_traffic_bypass_statistics 
device(config-telemetry-profile)# bypass-lsp xm2by